L-Arginine CAS 74-79-3 (H-Arg-OH) Assay 98.5~101.0% Factory (AJI 97/USP/BP/FCC Standard)

Short Description:

Chemical Name: L-(+)-Arginine; L-Arginine

Synonyms: L-Arg; H-Arg-OH; (Abbreviated Arg or R)

CAS: 74-79-3 

Appearance: White Crystal or Crystalline Powder

Assay: 98.5~101.0% (Calculated on the Dried Basis)

Standard: AJI 97; USP; EP; FCC

Contact: Dr. Alvin Huang

Mobile/Wechat/WhatsApp: +86-15026746401

E-Mail: alvin@ruifuchem.com


Product Detail

Related Products

Product Tags

74-79-3 - Description:

Shanghai Ruifu Chemical Co., Ltd. is the leading manufacturer and supplier of L-Arginine (H-Arg-OH) (Abbreviated Arg or R) (CAS: 74-79-3) with high quality, production capacity 3000 tons per year. Ruifu Chemical supplys a series of amino acids and derivatives. We can provide COA, worldwide delivery, small and bulk quantities available. If you are interested in L-Arginine, Please contact: alvin@ruifuchem.com

74-79-3 - Chemical Properties:

Chemical Name L-Arginine; L-(+)-Arginine
Synonyms L-Arg; H-Arg-OH; (Abbreviated Arg or R); Arginine; L(+)-Arginine
CAS Number 74-79-3
Stock Status In stock, Production Capacity 3000 Tons per Year
Molecular Formula C6H14N4O2
Molecular Weight 174.20
Melting Point 222℃(dec.) (lit.)
Density 1.2297 g/cm3 
Solubility in Water Soluble in Water, Almost Transparency
Sensitive Air Sensitive
Stability Incompatible With Strong Oxidizing Agents 
COA & MSDS Available
Place of Origin  China
Product Categories  Amino Acids and Derivatives 
Brand Ruifu Chemical

74-79-3 - Specifications:

Item Specifications
Appearance White Crystal or Crystalline Powder
Assay 98.5% to 101.0% (Calculated on the dried basis)
Identification Infrared Absorption Spectrum 
Solubility Soluble in Water. Slightly Soluble in Ethanol. Insoluble in Ethyl Ether
Specific Rotation [α]D20 +26.9° ~ +27.9° (C=8, 6N HCl)
State of Solution Clear and Colorless
Transmittance ≥98.0%
Chloride (Cl) ≤0.020%
Ammonium (NH4) ≤0.020%
Sulfate (SO4) ≤0.020%
Iron (Fe) ≤10ppm
Heavy Metals (Pb) ≤10ppm
Arsenic (AS2O3) ≤1.0ppm
Other Amino Acids Conforms
Loss on drying ≤0.50% (Dry it at 105℃ for 3 hours)
Residue on Ignition ≤ 0.10%
pH Value 10.5~12.0
Test Standard AJI 97; FCC; USP; EP

74-79-3 EP11 Reference Standard:

DEFINITION
Arginine contains not less than 98.5 per cent andnot more than the equivalent of 101.0 per cent of(S)-2-amino-5-guanidinopentanoic acid, calculated withreference to the dried substance.
CHARACTERS
Appearance: white or almost white, crystalline powder or colourless crystals, hygroscopic. Solubility: freely soluble in water, very slightly soluble in ethanol (96 percent).
IDENTIFICATION
First identification: A, C.
Second identification: A,B,D,E
A. It complies with the test for specific optical rotation (seeTests).
B. Solution S (see Tests) is strongly alkaline (2.2.4).
C. Examine by infrared absorption spectrophotometry (2.2.24), comparing with the spectrum obtained witharginine CRS.Examinethesubstancespreparedasdiscs.
D. Examine the chromatograms obtained in the test for ninhydrin-positive substances. The principal spot in the chromatogram obtained with test solution (b) is similarin position, colour and size to the principal spot in thechromatogram obtained with reference solution (a).
E. Dissolve about 25 mg in 2 ml of water R. Add 1ml of α-naphthol solution R and 2 ml of a mixture of equal volumes of strong sodium hypochlorite solution R and water. A red colour develops.
TESTS
Solution S. Dissolve2.5gindistilled water Rand dilute to50 ml with the same solvent.
Appearance of solution. Solution S is clear (2.2.1)and not more intensely coloured than reference solution BY6 (2.2.2, Method II).
Specific optical rotation (2.2.7). Dissolve 2.00 g in hydrochloric acid R1 and dilute to 25.0 ml with the same acid. The specific optical rotation is + 25.5 to + 28.5, calculated with reference to the dried substance.
Ninhydrin-positive substances. Examine by thin-layer chromatography (2.2.27), using a TLC silica gel plate R.
Test solution (a). Dissolve 0.10 g of the substance to be examined in dilute hydrochloric acid Rand dilute to 10 ml with the same acid.
Test solution (b). Dilute 1 ml of test solution (a) to 50 ml with water R.
Reference solution (a). Dissolve 10 mg of arginine CRS in 0.1 M hydrochloric acid and dilute to 50 ml with the same acid.
Reference solution (b). Dilute 5 ml of test solution (b) to 20 ml with water R.
Reference solution (c). Dissolve 10 mg of arginine CRS and10 mg of lysine hydrochloride CRS in0.1 M hydrochloric acid and dilute to 25 ml with the same acid.
Apply to the plate 5 μl of each solution. Allow the plate to dry in air. Develop over a path of 15 cm using a mixture of 30 volumes of concentrated ammonia R and 70 volumes of 2-propanol R. Dry the plate at 100°C to105°C until the ammonia disappears completely. Spray with ninhydrin solution R and heat at 100°C to 105°C for 15min. Any spot in the chromatogram obtained with test solution (a), apart from the principal spot, is not more intense than the spotin the chromatogram obtained with reference solution (b) (0.5 per cent). The test is not valid unless the chromatogram obtained with reference solution (c) shows two clearly separated spots.
Chlorides (2.4.4). To 5 ml of solution S add 0.5 ml of dilute nitric acid R and dilute to 15 ml with water R. The solution complies with the limit test for chlorides (200 ppm).
Sulphates (2.4.13). To 10 ml of solution S, add 1.7 ml of dilute hydrochloric acid R and dilute to 15 ml with distilled water R. The solution complies with the limit test forsulphates (300 ppm).
Ammonium (2.4.1). 50 mg complies with limit test B for ammonium (200 ppm). Prepare the standard using 0.1 ml of ammonium standard solution (100 ppm NH4) R.
Iron (2.4.9). In a separating funnel, dissolve 1.0 g in 10 ml of dilute hydrochloric acid R. Shake with three quantities, each of 10 ml, ofmethyl isobutyl ketone R1, shaking for 3 min each time. To the combined organic layers add 10 ml of water Rand shake for 3 min. The aqueous layer complies with the limit test for iron (10 ppm).
Heavy Metals (2.4.8). Dissolve 2.0g in water R and dilute to 20ml with the same solvent. 12ml of the solution complies with limit test A for heavy metals (10ppm).Prepare the standard using lead standard solution(1ppm Pb) R.
Loss on Drying (2.2.32). Not more than 0.5 percent, determined on 1.000 g by drying in an oven at 105℃
Sulphated ash (2.4.14). Not more than 0.1 percent,determined on 1.0 g.
ASSAY
Dissolve 0.150 g in 50 ml of water R. Using 0.2ml of methyl red mixed solution Ras indicator, titrate with 0.1 M hydrochloric acid until the colour changes from green toviolet-red.
1ml of 0.1 M hydrochloric acidis equivalent to 17.42 mg of C6H14N4O2.
STORAGE
Store protected from light.

74-79-3 - Package/Storage/Shipping:

Package: Bottle, Aluminium foil bag, 25kg/Cardboard Drum, or according to customer's requirement.
Storage Condition: Keep the container tightly closed and store in a cool, dry (2~8℃), well-ventilated warehouse away from incompatible substances. Keep away from sunshine; avoid fire and heat sources; avoid moisture.
Shipping: Deliver to worldwide by air, by FedEx / DHL Express. Provide fast and reliable delivery. 

74-79-3 - Advantages:

Sufficient Capacity: Sufficient facilities and technicians

Professional Service: One stop purchasing service

OEM Package: Custom package and label available

Fast Delivery: If within stock, three days delivery guaranteed

Stable Supply: Maintain reasonable stock    

Technical Support: Technology solution available

Custom Synthesis Service: Ranged from grams to kilos

High Quality: Established a complete quality assurance system

74-79-3 - FAQ:

www.ruifuchem.com

74-79-3 - Risk and Safety:

Risk Codes R36 - Irritating to the eyes
R36/37/38 - Irritating to eyes, respiratory system and skin.
R20/21/22 - Harmful by inhalation, in contact with skin and if swallowed.
R61 - May cause harm to the unborn child
Safety Description S24/25 - Avoid contact with skin and eyes.
S36 - Wear suitable protective clothing.
S26 - In case of contact with eyes, rinse immediately with plenty of water and seek medical advice.
S45 - In case of accident or if you feel unwell, seek medical advice immediately (show the label whenever possible.)
S53 - Avoid exposure - obtain special instructions before use.
S39 - Wear eye / face protection.
WGK Germany 3
RTECS CF1934200
FLUKA BRAND F CODES 10-23
TSCA Yes
HS Code 2922499990
Hazard Class IRRITANT

74-79-3 - Applications:

L-Arginine (CAS: 74-79-3) is a type of amino acid. The L-form is one of the 20 most common natural amino acids. A nonessential amino acid in human, Arginine is a substrate of nitric oxide synthase, which is converted to L-citrulline and nitric oxide (NO). It is widely used as an ingredient in dietary supplements, infusions and infant formulas.
L-Arginine (CAS: 74-79-3) can be used as pharmaceutical raw material and is an important ingredient in amino acid infusions and integrated amino acid preparations. L-Arginine is used in food additive and nutritional supplement; flavoring agent. Used in the curing of hepatic coma, the preparation of amino acid transfusion; or used in the injection of liver disease.

  • Write your message here and send it to us